Henry-engineering SAM User Manual download pdf (Page 2)

PAGE 2

PHONES JACK

SAM includes a Headphone jack on the front panel. It may be used for aural monitoring. Use contemporary

headphones with an impedance of at least 24 ohms. Do not use older “8 ohm” headphones.

DISABLING THE PHASE DISPLAY

The Phase display can be turned off if it is unnecessary or confusing to non-technical personnel. Open the unit,

and set JP2 to OFF. JP2 is located just behind the row of Phase display LEDs.

TECHNICAL SPECIFICATIONS

Analog Inputs 20K imped, balanced, stereo

Digital Input, XLR* AES3 (AES/EBU), 110 ohms

Digital Input, BNC* AES3id, 75 ohms

Digital Input sample rate 32 kHz to 192 kHz

Input Level range, analog 0 VU = -4 dBu to +10 dBu

Input Level range, digital 0 VU = -26 dBfs to -14 dBfs

Level display -25 to +3 VU

Phase display -23 to 0 VU

Monitor output 3.5mm jack for stereo headphones, 24 ohms min.

Power Requirement 115 or 230 VAC, 50-60 Hz, 6W

Construction Steel enclosure

Physical 5.75”w X 5.50”d X 1.60”h, 3 lbs

Approval City of Los Angeles Elect. Test Lab

*Requires optional AES decoder.

Specifications subject to change without notice.

Rev. A 05/11

JP1 - TERMINATION JUMPER

JP2 – PHASE DISPLAY ON/OFF

1 2

No comments

Henry-engineering SAM User Manual Page 2